High pressure tanning salon equipment by Darkertan DDQ series

...DD series vertical tanning equipment booths by Darkertan...

Back to Suntanning Main Page

DD-Vertical Tanner technical specifications
LOW PRESSURE (VHR/VLR Technology)

Model Name DD-40-VHR DD-45-VHR DD-50-VHR DD-55-VHR

Number of Lamps 40 VHR 45 VHR 50 VHR 55 VHR

Lamp Power 160W 160W 160W 160W

Power
Input 7600W 8400W 9800W 10800W

Required
breaker 50Amp 50Amp 60Amp 70Amp

Max. FDA exposure 10 min. 10 min. 10 min. 10 min.

Model Name DD-40-VLR DD-45-VLR DD-50-VLR DD-55-VLR

Number of Lamps 40 VLR 45 VLR 50 VLR 55 VLR

Lamp Power 100W 100W 100W 100W

Power
Input 4500W 5100W 5600W 6100W

Required
breaker 30 Amp. 40 Amp. 50 Amp. 50 Amp.

Max. FDA exposure
10 Min. 10 Min. 10 Min. 10 Min.

Input voltage 220/240 VAC,60Hz, (50 HZ is available upon request)

Lamp type Reflector

Reflector Aluminum diffusive pattern reflectors all around

Lamp configuration Staggered for maximum ankle and shoulder tan

Cabin
inner dia. 31" DIA

Cabin
outer dia. 47.5" DIA

Cabin
height inside 80"

Cabin
height out. 91.5"

Door type Double swing out type; on bronze bearings

Entrance width 29" wide entrance

Ballasts Cosmedico, VHR/VLR, choke type

Ballasts
Location Incorporated into design(No external boxes)

Cooling High pressure impeller type, placed on the top air inlet is through 2520 holes on the floor section. Ballasts are cooled by convection and their heat is dissipated to outside of cabin.

Lamp
Protection 1/4" Dia. steel wire grid (no acrylic sheets)

Timer Available with mechanical, or Data base 24 volt, push button and emergency stop. A totalizer type hour counter is mounted on the ceiling.

Arm rest
bars for
underarm
tanning Thick steel bars for easy cleanig

Dust
prevention Dust collection box in the floor with easy access for vacuuming; removable impeller grills for easy cleaning.

Finishing Gold color anodized aluminum extrusion finish and baked powder coated steel sheetparts
Assembled with screws only (No welding)
No plastics
No wood particies panels
Only metal components for maximum heat dissipation and highest fire retardant qualities

State-of-the-art technology and
high performance workmanship

Unparalleled tanning of ankles and shoulders by the use of staggered lamp design.
Ultra-performing, low power consumption 55-160 watts lamps.
Genuine Cosmedico VHR lamps and choke ballasts.
Easy access double-swing doors.
Floor dust collection chamber results in dust-free environment
All metal construction provides strength and durability.
Even heat dissipating and fire retardant casing.
Avant-garde technology boosts self-cooling, trouble-free ballast technology.
Ergonomically contoured cabin for all-around tanning power.

WHY We don’t use acrylic sheets in our cabins with low pressure VHR lamps?

1) A cabin is made for low maintenance such as; not cleaning the smudges on acrylic sheets after each customer which is very difficult in a small space for the salon employee.

2) A regular brand new acrylic sheet cuts UVA, UVB by 8% The UVA transmissivity is lost up to 20 % in two weeks if the collecting dust is not cleaned off the inner side of the acrylic sheet.

3) All acrylic sheets cut off some of the UVB region which is very important for that extra tan.

4) Replacing acrylic sheets at least every two years cost the owner.

That is why all serious cabins are made without the acrylic sheets. Having a cabin with acrylic sheets instead of strong steel grids is like; installing brand new lamps with a loss of 200 hours to begin with in terms of performance.